Considering a hardwood lumber supplier isn’t that complicated as it is said. Hardwood lumber is like silk, leather and precious stones, which have variety of characteristics and markings. Before making any final decision, one should know that lumber from the same tree may sometime show significant variation in color.
Usually, young wood closer to the bark will be lighter in tone than the central wood known as heartwood. The natural variation in color and texture give the hardwood lumber their beauty. Woodspec is one of the best suppliers to fulfill all your demands under one roof.
Here are the top 4 factors that one should consider when buying hardwood lumber in order to get the best markings:
Before buying hardwood lumber, one should check the thickness in inches. For example, a 1 inch thick board is typically written as 4/4. So, this thickness is before being sawn. Check for the correct requirement because after being sawn, the lumber is dried and the measurement remains like 7/8” (.875 inches). It is better to cross verify this with your carpenter before proceeding with the payment process.
Grade is one of the most important factors you should look for while buying hardwood lumber. According to the rules by National Hardwood Lumber Association, the higher the grade, the better is the wood. Grades are followed by #1 Common and #2 Common, which means grades depend on the project.
For example, high quality furniture should follow high grade lumber (#2 Common), while small household things can be made with #1 Common grade lumbers.
Check with your team or family members about the preferred color. There are several choices like dark, light, mid tones or red tones of hardwood. Decide which colors will suit your project and go for it accordingly. This also depends on where you are going to use the hardwood lumber. The color tones vary from place to place.
Hardwood lumber is not as cheap as floor wood. Since hardwood is sold in terms of lengths, widths and thicknesses, one has to check the budget. Determine how much you are willing to spend and act according to your plan.
Check for the rate by visiting saw mills and also through internet. Cross verify with your friends and contractors regarding the same. If possible, ask for quotations from vendors so that you can invest your money wisely.